Honeycomb Composite Cutting Router Bits Q&A

Question 1

What is composite honeycomb? View answer

Router Bits > Honeycomb Composite Cutting Router Bits

Question 2

Would the 59432-K be a good bit to use with a Shaper Origin View answer

Amana Tool 59432-K CNC SC Spektra Extreme Tool Life Coated Straight Flute Finishing with Chipbreaker 1/4 D x 3/4 CH x 1/4 SHK x 2-1/2 Inch Long x 3 Flute Router Bit

Question 3

What is a unique challenge facing composite cutting operations? View answer

Router Bits > Honeycomb Composite Cutting Router Bits

Question 4

What are the types of composites? View answer

Router Bits > Honeycomb Composite Cutting Router Bits

Question 5

Conflicting chipload/feedrate recommendations for Amana 46180 on 0.5" Baltic birch at .22" DOC View answer

CNC Solid Carbide Compression Spiral Bits - 2 Flute

Question 6

Can I put a bearing on this and use it as a follow router, using a template for cutting thin wood veneer? View answer

Amana Tool 46403 SC Spiral Plunge 1/16 D x 1/2 CH x 1/4 SHK x 2 Inch Long Down-Cut Router Bit

Question 7

Request: Solid carbide ZrN honeycomb hogger router bits (1.5, 3, 4 mm) + CNC tools catalog for cutting corrugated PVC, acrylic, styrofoam View answer

CNC Solid Carbide ZrN Coated Honeycomb Hogger Router Bits

Question 8

Recommended router bit for fine engraved text on hardwoods with Shaper Origin (D 1/32" final pass?) View answer

Amana Tool 46145 SC Spiral Plunge 1/32 D x 1/8 CH x 1/8 SHK x 2 Inch Long 2 Flute Up-Cut Router Bit

Question 9

Best router bit for 0.250" carbon fiber to match finish of 3/16" ALTiN 4‑flute endmills View answer

CNC Solid Carbide Carbon Graphite and Carbon Fiber Panel Cutting Router Bits

Question 10

Hola queria saber si las frazas de diamantes solo la tienen en pulgadas por que necesitaría en mm View answer

CNC Polycrystalline Diamond (PCD) Compression Router Bit Up/Down Shear with Carbide Plunge Point RH Rotation

Question 11

Is this bit suitable for cleanly drilling carbon fiber with a handheld drill? Alternatives? View answer

Amana Tool 48050-D High Performance Drill End 1/8 D x 1/2 CH x 1/8 SHK x 1-1/2 Inch Long SC Fiberglass and Composite Cutting AlTiN Coated Router Bit

Question 12

What's the material made of? What parentage of Tungsten? Also what's it hardness rate? Thank you. View answer

Amana Tool 46170-5, 5-Pack CNC Solid Carbide Compression Spiral 1/4 D x 7/8 CH x 1/4 SHK x 2-1/2 Inch Long Router Bits

Question 13

How close to a polished (mirror) finish will a solid carbide spiral finisher bit get on 1/4" clear acrylic edges? View answer

Solid Carbide Spiral Finisher Up-Cut & Down-Cut 3 Flute Router Bits

Question 14

Is this suitable for HPL 12mm - merino (like trespa) ? we want to cut it by single pass View answer

Amana Tool 46447-DLC SC Diamond-Like Carbon (DLC) Coated Spiral Plunge 1/2 D x 7/8 CH x 1/2 SHK x 3 Inch Long 2 Flute Down-Cut Router Bit for Solid Wood

Question 15

Will the 46180-K bit work good for cutting through pine and hickory? Looking for a longer 1/8 diameter bit. View answer

CNC Solid Carbide Compression Spiral Bits - 2 Flute

Question 16

It says the bore is 1/2" & 3/4". Does that mean these cutters come with the 3/4" to 1/2" bushings? View answer

Amana Tool 51631 Solid Carbide Spiral Finisher 1/4 Dia x 7/8 Cut Height x 1/4 Shank x 3 Inch Long Up-Cut Router Bit, Leaves an Extra High Surface Finish

Question 17

is this bit considered an "end mill"? View answer

CNC Solid Carbide Compression Spiral Bits - 2 Flute

Question 18

Hi, can it also cut fiber cement board? View answer

Solid Carbide End Mill Point Diamond Pattern, Composite Cutting Router Bits

Question 19

will this blade fit a Porter-Cable #556 type 4 plate joiner , if not do you have one that will fit. View answer

Amana Tool 46305 Solid Carbide ZrN Coated Honeycomb Hogger 3/8 D x 2 CH x 3/8 SHK x 4 Inch Long, 8-Flute CNC Router Bit

Question 20

What is a hook angle? The only information about this parameter I found was that it is "positive". View answer

Amana Tool 46097 Solid Carbide Spiral 1/4 Dia x 3/4 Cut Height x 1/4 Shank x 2-1/2 Inch Long Composite, Fiberglass & Phenolic Cutting ZrN Coated Down-Cut Router Bit

Question 21

What is the different 46190 and 46190 LH View answer

CNC Solid Carbide Compression Spiral Bits - 2 Flute

Question 22

Hi,I'm new in CNC and need know if I can cut MDF, Soft and Hard wood with this...thanks! View answer

Solid Carbide Spiral Flute Plunge-2 Flute-UpCut Router Bits

Question 23

What is the difference between up-cut and down-cut? Is this cutter a compression cutter as well? View answer

Amana Tool 49740-K CNC SC Spektra Extreme Tool Life Coated Phenolic, Resin and Composite Cutting with Chipbreaker Slow Helix Down-Cut 1/4 D x 3/4 CH x 1/4 SHK x 2-1/2 Inch Long x 3 Flute Router Bit

Question 24

compression spiral bits in 5 mm dia ?I have cnc router machine ,can you send the catalogue View answer

CNC Solid Carbide Compression Spiral Bits - 3 Flute

Question 25

It the product comes with the spacers and it is possible to send it to Nicaragua View answer

Amana Tool 51631 Solid Carbide Spiral Finisher 1/4 Dia x 7/8 Cut Height x 1/4 Shank x 3 Inch Long Up-Cut Router Bit, Leaves an Extra High Surface Finish

Question 26

what is the feed rate and speed 3/8 compression #46172 I am cutting 3/4 mdf View answer

CNC Solid Carbide Compression Spiral Bits - 2 Flute

Question 27

Can you cut through 1 1/2 " thick plywood for a door boring machine ? View answer

Amana Tool 46123 Abrasive Type Plunge Diamond Pattern, Composite Cutting 1/2 D x 2-1/8 CH x 1/2 SHK x 4 Inch Long Router Bit

Question 28

what's the feed and speed for 46180,ill be cutting 3/8 Baltic Birch? View answer

CNC Solid Carbide Compression Spiral Bits - 2 Flute

Question 29

Is tool 46468 ok to do chamfering on 3mm thick carbon fiber plates? View answer

CNC Solid Carbide 90 Degree Angle Countersink and Chamfer Router Bits

Question 30

What is the recommended IPM / RPM for this tool in 3/4" melamine? View answer

Amana Tool 46020-DLC CNC SC Diamond-Like Carbon (DLC) Coated Mortise Compression Spiral 3/8 D x 1 CH x 3/8 SHK x 3 Inch Long 3 Flute Router Bit for Solid Wood

Question 31

speeds an feeds for 3-1/8" .250 dia. Straight Edge shape cutter? View answer

Amana Tool 51631 Solid Carbide Spiral Finisher 1/4 Dia x 7/8 Cut Height x 1/4 Shank x 3 Inch Long Up-Cut Router Bit, Leaves an Extra High Surface Finish

Question 32

Will this tool work with my drill press? View answer

Amana Tool 48014 Medium Burr with End Mill Point 1/4 D x 1-1/2 CH x 1/4 SHK x 3 Inch Long SC Fiberglass and Composite Cutting Router Bit

Question 33

why is this product not suitable for a table mounted router? View answer

CNC Polycrystalline Diamond (PCD) Compression Router Bit Up/Down Shear with Carbide Plunge Point RH Rotation

Question 34

Hi, can this bit be used to plunge into FRP panels? Thanks View answer

Solid Carbide Medium Burr with End Mill Point, Fiberglass and Composite Cutting Router Bits

Question 35

Is it recommended or not recommended for MDF / Chipboard? View answer

Amana Tool 49742-K CNC SC Spektra Extreme Tool Life Coated Phenolic, Resin and Composite Cutting with Chipbreaker Slow Helix Down-Cut 3/8 D x 1 CH x 3/8 SHK x 3 Inch Long x 3 Flute Router Bit

Question 36

Hi there is this Rez 100 have a 30mm bore View answer

Amana Tool 46091 Solid Carbide Spiral 1/8 Dia x 1/2 Cut Height x 1/8 Shank x 2 Inch Long Composite, Fiberglass & Phenolic Cutting ZrN Coated 3 Flute Up-Cut Router Bit

Question 37

Can I use this particular bit in the Shaper Origin? View answer

Amana Tool 46170-K CNC SC Spektra Extreme Tool Life Coated Compression Spiral 1/4 D x 7/8 CH x 1/4 SHK x 2-1/2 Inch Long 2 Flute Router Bit

Question 38

Is this suitable for milling Carbon fiber? View answer

CNC Polycrystalline Diamond (PCD) Compression Router Bit Up/Down Shear with Carbide Plunge Point RH Rotation

Question 39

What is the max RPMs this bit is rated for View answer

Amana Tool 46704-K CNC SC Spektra Extreme Tool Life Coated Compression Spiral 3/8 D x 1-1/4 CH x 3/8 SHK x 3 Inch Long 2 Flute Router Bit for Birch Plywood

Question 40

Can I cut stone with this? Need a stone bit. View answer

Amana Tool 44110 Diamond Grit 1/4 Dia x 1-1/8 Cut Length x 1/4 Inch Shank, 3 Flute Down-Cut Alloy Steel End Mill Coated with Electro Plated Diamonds

Question 41

what is the xxxx for in the end of the shank? View answer

CNC Polycrystalline Diamond (PCD) Compression Router Bit Up/Down Shear with Carbide Plunge Point RH Rotation

Question 42

would this be suitable for cutting pvdf sheets? View answer

CNC Solid Carbide Carbon Graphite and Carbon Fiber Panel Cutting Router Bits

Question 43

i ask if you have suppler in uae Regardsamr View answer

CNC Solid Carbide ZrN Coated Honeycomb Hogger Router Bits

Question 44

looking for info on depth of cut vs. speed for 46121 . using this bit for mortising on a cnc , 1 1/8" depth. View answer

Solid Carbide Spiral Flute Plunge-2 Flute-UpCut Router Bits

Question 45

I need to cut 10 mm Honeycomb Panels (1 mm skin thk) which size ZrN coated AHP hogger would you suggest ?Thanks View answer

CNC Solid Carbide ZrN Coated Honeycomb Hogger Router Bits

Question 46

Hi, Can I get this tool with a ball end? Would be much appreciated. 3/8" diameter, 4" long, 2"cutting depth height. View answer

CNC Solid Carbide ZrN Coated Honeycomb Hogger Router Bits

Question 47

I already have this cutter, the question is if it can be used on G-10 since it's not specified on the material list View answer

CNC Solid Carbide Carbon Graphite and Carbon Fiber Panel Cutting Router Bits

Question 48

Do you sell an EZ-Dial with a 20 mm bore and 100–120 mm diameter? View answer

Amana Tool 46093 Solid Carbide Spiral 1.2mm Dia x 5mm Cut Height x 1/8 Inch Shank x 35mm Long Composite, Fiberglass & Phenolic Cutting ZrN Coated 3 Flute Up-Cut Router Bit

Question 49

What adapter/mount is needed to fit a 609-156 in a drill press to hold a chisel? View answer

Amana Tool 48014 Medium Burr with End Mill Point 1/4 D x 1-1/2 CH x 1/4 SHK x 3 Inch Long SC Fiberglass and Composite Cutting Router Bit

Question 50

Can this bit cut 1.5in thick wood? View answer

Amana Tool 46435 Solid Carbide Spiral Plunge 7/16 D x 1 CH x 1/2 SHK x 3 Inch Long Down-Cut Router Bit

Honeycomb Composite Cutting Router Bits Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic