Answer
Aug 01, 2017 - 12:00 AM
The following parameters have been calculated based on a 1/2" shaft and hardwood materials:
250" IPM @ 10,000 RPM
Chip Load Per Tooth: 0.001"
You may want to start at 200 IPM and ramp it up to 250" IPM.
If you need parameters for a different material and 3/4" shaft please email us to ttsupport@toolstoday.com
250" IPM @ 10,000 RPM
Chip Load Per Tooth: 0.001"
You may want to start at 200 IPM and ramp it up to 250" IPM.
If you need parameters for a different material and 3/4" shaft please email us to ttsupport@toolstoday.com
