Straight Plunge CNC Router Bits Q&A

Question 1

Optimal RPM, feed (IPM), and depth per pass for 1-1/8" 45449 router bit in Purple Heart and Ash View answer

Straight Plunge Cutting Router Bits 1/2 Shank - High Production

Question 2

Can you plunge with a straight router bit? View answer

CNC Router Bits and Insert Bits > Straight Plunge CNC Router Bits

Question 3

Speeds/feeds for bits #45426 and #46348 in hardwood when cutting at half the bit depth View answer

Straight Plunge Cutting Router Bits 1/2 Shank - High Production

Question 4

What bit do you use for a plunge router? View answer

Question 5

Looking for router bits longer than 3" (straight plunge, 1/2" shank) to cut 3" SIP panels View answer

Straight Plunge Cutting Router Bits 1/2 Shank - High Production

Question 6

Do Freud router bits hold up when routing 3/4" 11-ply Baltic birch plywood? View answer

Stagger Tooth Plunge Cutting Router Bits

Question 7

Can this router bit be used on acrylic? Expected finish and speeds/feeds to avoid melting View answer

Straight Plunge Cutting Router Bits 1/2 Shank - High Production

Question 8

RC-1024 specs needed to calculate feedrate, plunge depth, and maximum RPM View answer

Economy Insert Staggered Plunge Router Bit

Question 9

Are plunge router bits different? View answer

Question 10

Testing View answer

Straight Plunge Cutting Router Bits 1/2 Shank - High Production

Question 11

Is there a listed max rpm on this bit? View answer

Insert CNC Straight Router Bits

Question 12

Je veux faire des portes armoires 3/4" jusqu'Ã 1 1/2" ce set est-il suffisant? ? View answer

Amana Tool DRB-420 Polycrystalline Diamond (PCD) Tipped Double Flute 1/4 D x 3/4 Inch CH x 1/4 SHK Straight Plunge Router Bit

Question 13

Hi. What would the feeds and speeds be for 45408 cutting plywood. Thanks View answer

Straight Plunge Cutting Router Bits 1/2 Shank - High Production

Question 14

Can this bit be used on acrylic? What kind of finish would you suspect? View answer

Straight Plunge Cutting Router Bits 1/2 Shank - High Production

Question 15

Speed chart for Solid Carbide Straight Plunge View answer

Amana Tool 43820 Solid Carbide Straight Plunge 1/4 D x 3/4 CH x 1/4 SHK x 2-1/2 Inch Long Router Bit

Question 16

Good for cutting oak View answer

Amana Tool 51325 Carbide Tipped Stagger Tooth Plunge 1/2 D x 3-1/2 CH x 1/2 Inch SHK Router Bit

Question 17

What are the different types of straight router bits? View answer

CNC Router Bits and Insert Bits > Straight Plunge CNC Router Bits

Question 18

Can I plunge into work View answer

Amana Tool 45442 Carbide Tipped Straight Plunge High Production 3/4 D x 1-1/2 CH x 1/2 SHK x 3-1/8 Inch Long Router Bit

Question 19

Do you make the 1/4" version. View answer

Straight Plunge Router Bits, Non-BG

Question 20

What is the feed/speed chart? View answer

Timberline 100-54 Carbide Tipped Straight Plunge Economy 1 Inch D x 3/4 CH x 1/4 SHK Router Bit

Question 21

What is the maximum rpm for tool 51354? View answer

Amana Tool 51354 CNC Carbide Tipped Compression 3 Blade Stagger 3/4 D x 2 CH x 3/4 SHK x 4-3/8 Inch Long Router Bit

Question 22

Do these insert bits come with any blades? View answer

Insert CNC Straight Router Bits

Question 23

Can concrete be cut or mortised with this bit. View answer

Amana Tool DRB-424 Polycrystalline Diamond (PCD) Tipped Double Flute 1/2 D x 3/4 Inch CH x 1/2 SHK Straight Plunge Router Bit

Question 24

I need bits for 5/8 inch arbor. Do You have any? View answer

Solid Carbide Straight Plunge Cutting-2 Flute

Question 25

can this be used to bore pilot holes for hinges? View answer

Timberline 100-08 Carbide Tipped Straight Plunge Economy 3/32 D x 1/4 CH x 1/4 Inch SHK Router Bit

Question 26

Will this cut polyethylene sheet material 3/4" thick? View answer

Amana Tool 45400 Carbide Tipped Straight Plunge High Production 3/8 D x 1-1/4 CH x 3/8 SHK Router Bit

Question 27

hi,Do you have something identical that would cut aluminum/metal? View answer

Timberline 100-50 Carbide Tipped Straight Plunge Economy 3/4 D x 3/4 CH x 1/4 Inch SHK Router Bit

Question 28

Hello.Where can I find the Chip Load for the 100-50 plunge bit?Regards. View answer

Straight Plunge Cutting Router Bits 1/4 Shank - Economy

Question 29

Can someone tell me an appropriate chipload for cutting 3/4'' MDF with tool 41448? Thanks. View answer

Super Plunge Router Bits-1/2 Inch shank

Question 30

What is the feed/speed chart? And what is the recommended depth per pass for this tool? (for wood) View answer

Timberline 100-22 Carbide Tipped Straight Plunge Economy 1/4 D x 1 Inch CH x 1/4 SHK Router Bit

Question 31

looking to get feed and speed information on this tool. Will be putting a dado in 1/2 maple plywood. View answer

Amana Tool 45480-CNC Carbide Tipped Straight Plunge 2 D x 1-1/4 CH x 3/4 SHK CNC Router Bit

Question 32

what is the thread size for the two screws that hold the insert to the tool? Do you sell replacement screws? View answer

Insert Straight Router Bits-1/2 Inch shank

Question 33

Can these straight bits be used on a cnc to cut profiles and shapes out of wood? I usually use 2 flute endmills View answer

Straight Plunge Cutting Router Bits 1/4 Shank - Economy

Question 34

Can one bit cut OSB sheathing and 1/2" interior drywall when cutting window openings? View answer

Stagger Tooth Plunge Cutting Router Bits

Question 35

Best router parameters for crisp edges on clear plastic — effect of increasing RPM to 24k–28k? View answer

Amana Tool DRB-421 Polycrystalline Diamond (PCD) Tipped Single Flute Down-Shear 1/4 D x 12.32mm (1/2) CH x 1/4 Inch SHK Straight Plunge Router Bit

Question 36

Is a 3/4" router bit (3-1/8" overall) suitable for plunging 2" deep with a Festool OF1400 through a template? View answer

Straight Plunge Cutting Router Bits 1/2 Shank - High Production

Question 37

Halve recommended cut depths: Bit #45426 1/2"→1/4", Bit #46348 1/4"→1/8" View answer

Straight Plunge Cutting Router Bits 1/2 Shank - High Production

Question 38

What are the speeds and Feeds info for the 45420 bit. View answer

Straight Plunge Cutting Router Bits 1/2 Shank - High Production

Question 39

Is this 17/32 router bit available in solid Carbide? View answer

Amana Tool 45429 Carbide Tipped Straight Plunge High Production 17/32 D x 1-1/4 CH x 1/2 SHK x 2-7/8 Inch Long Router Bit

Question 40

What speeds and feeds should the 2" diameter version be run at? View answer

Straight Plunge Router Bits, Non-BG

Question 41

What's the maximum depth of cut for this tool? View answer

Amana Tool 51354 CNC Carbide Tipped Compression 3 Blade Stagger 3/4 D x 2 CH x 3/4 SHK x 4-3/8 Inch Long Router Bit

Question 42

Can RC-3200 be used for straight plunge? View answer

Insert CNC Straight Router Bits

Question 43

Can be use it on fiberglass?Thanks View answer

Straight Plunge Cutting Router Bits 1/2 Shank - High Production

Question 44

Recommended CNC router feed and speed settings for cutting solid white oak? View answer

High Production 3° Down Shear Straight Plunge Router Bits

Question 45

Cutter performance on 3" XPS polystyrene foam for roughing before 1/4" finishing View answer

Amana Tool 45452-CNC Carbide Tipped Straight Plunge 1-1/2 D x 1-1/4 CH x 1/2 Inch SHK CNC Router Bit

Straight Plunge CNC Router Bits Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic