Spektra™ Extreme Tool Life Coated Router Bits Q&A

Question 1

Optimal Cutworx Apex Pro settings for 6mm expanded PVC — 3mm step, 24k RPM, 0.06 mm/s causing breaks View answer

Amana Tool 51415-K CNC Spektra Coated SC Spiral O Single Flute, Plastic Cutting 1/16 D x 1/4 CH x 1/8 SHK x 2 Inch Long Up-Cut Router Bit with Mirror Finish

Question 2

will the acrylic stick to bit View answer

Amana Tool 51441-K-5, 5-Pack CNC Spektra Coated SC Spiral O Single Flute, Plastic Cutting 1/16 D x 1/4 CH x 1/4 SHK x 2 Inch Long Up-Cut Router Bits with Mirror Finish

Question 3

Hi does this include programme to down load onto my computer for the cnc View answer

Amana Tool AMS-316 4-Pc CNC Simulated MDF Shaker Cabinet Door Router Bit Set II, Solid and Insert Carbide, 1/4 and 1/2 Inch Shank

Question 4

Cutting King ColorCore with 1/32" bit — request RPM, feed (IPM) and plunge rates for Shapeoko Pro 5 View answer

Amana Tool 51649-K CNC Spektra Coated SC Spiral O Single Flute, Plastic Cutting 1/32 D x 3/16 CH x 1/4 SHK x 2 Inch Long Up-Cut Router Bit with Mirror Finish

Question 5

Can this bit cut a 2" thick cast acrylic sheet (27"×60") for a cross? View answer

Amana Tool 51405-K CNC Spektra Coated SC Spiral O Single Flute, Plastic Cutting 1/4 D x 1 CH x 1/4 SHK x 2-1/2 Inch Long Up-Cut Router Bit with Mirror Finish

Question 6

What would be the max cutting speed with this 3-flute 1/8" bit at a cut depth of 1/4" View answer

Amana Tool 46051-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/8 Dia x 1/2 CH x 1/4 SHK 2 Inch Long Down-Cut Router Bit

Question 7

What is the recommended feed and speed for this bit for cutting Â½" lexan? View answer

Amana Tool 51411-K CNC Spektra Coated SC Spiral O Single Flute, Plastic Cutting 1/8 D x 1/2 CH x 1/4 SHK x 2 Inch Long Up-Cut Router Bit with Mirror Finish

Question 8

For wood carving what will delivery the best finish with a CNC the Spektra or ZrN Coated. View answer

Amana Tool AMS-148-K 4-Pc SC Spektra Extreme Tool Life Coated 2D/3D Carving 1/4 Inch SHK Router Bit Pack

Question 9

Would the 59432-K be a good bit to use with a Shaper Origin View answer

Amana Tool 59432-K CNC SC Spektra Extreme Tool Life Coated Straight Flute Finishing with Chipbreaker 1/4 D x 3/4 CH x 1/4 SHK x 2-1/2 Inch Long x 3 Flute Router Bit

Question 10

¿Cada cuántas horas afilar la fresa 46502-K y venden equipos de afilado? View answer

Amana Tool 46502-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia x 1-1/2 CH x 1/4 SHK 3-1/2 Inch Long Down-Cut Router Bit

Question 11

Options for cutting birch plywood after Amana 46700-K caused table damage View answer

Amana Tool 46700-K CNC SC Spektra Extreme Tool Life Coated Compression Spiral 1/4 D x 7/8 CH x 1/4 SHK x 2-1/2 Inch Long 2 Flute Router Bit for Birch Plywood

Question 12

Can't find feeds/speeds or listing for bit 48330-K in downloaded bit list View answer

Amana Tool 48330-K SC Spektra Extreme Tool Life Coated Spiral Plunge 3/16 Dia x 1 CH x 1/4 SHK 3 Inch Long Up-Cut Router Bit

Question 13

51435-K is not locate din the downloaded tool database. Can you send me info to add to Vcarve pro? View answer

Amana Tool 51435-K CNC Spektra Coated SC Spiral O Single Flute, Plastic Cutting 1/8 D x 7/8 CH x 1/4 SHK x 2-1/2 Inch Long Up-Cut Router Bit with Mirror Finish

Question 14

Can this bit cut deep (1-3/4") mortises in maple with a clean top edge using a handheld plunge router? View answer

CNC Solid Carbide Spektra Extreme Tool Life Coated Mortise Compression Spiral Router Bits

Question 15

Recommended milling bit for rubber blanket to achieve a sharper finished edge View answer

CNC Solid Carbide Spektra Extreme Tool Life Coated Spiral O Flute, Plastic Cutting Down-Cut Router Bits

Question 16

Melamine top-edge chipping — CNC: 2.2k spindle, 18k RPM, 0.125″ pass depth, 220 IPM feed, 110 IPM plunge View answer

CNC Solid Carbide Spektra Extreme Tool Life Coated Compression Spiral Router Bits

Question 17

Optimize VCarve speed on Shapeoko XXL: ideal depth-per-pass and settings for secondary bit? View answer

15°, 30°, 45° and 120° Solid Carbide Spektra Extreme Tool Life Coated Engraving Router Bits for Signmaking

Question 18

Conflicting Amana Spektra 46170K chipload in MDF: 0.0021 (80 ipm) vs 0.013 (468 ipm) — which feed rate is correct? View answer

CNC Solid Carbide Spektra Extreme Tool Life Coated Compression Spiral Router Bits

Question 19

Feed and speed recommendations for 46260K Spectra bit on thin carbon fiber sheets (0.5–1.0 mm) View answer

CNC Solid Carbide Spektra Extreme Tool Life Coated Carbon Graphite and Carbon Fiber Panel Cutting Router Bits

Question 20

Is there an 1/8 inch downcutter that has enough cutting length to cut through 3/4" mdf? View answer

SC Spektra Extreme Tool Life Coated Spiral Flute Plunge 2 Flute Down-Cut Router Bits

Question 21

Feed rate & depth for 1/4" Spektra compression bit (46170-K) cutting 12mm plywood — full depth at 540 IPM? View answer

CNC Solid Carbide Spektra Extreme Tool Life Coated Compression Spiral Router Bits

Question 22

3HP spindle: can recommended feeds/speeds and an up-cut endmill cut 7/8" hard maple without top-edge tearout? View answer

Solid Carbide Spektra Extreme Tool Life Coated Spiral Flute Plunge-2 Flute-Upcut Router Bits

Question 23

Sirve para cortar melamina? Si no es asi.cual seria la indicada. Ademas podria usarse con router? View answer

Solid Carbide Spektra Extreme Tool Life Coated Spiral Flute Plunge-2 Flute-Upcut Router Bits

Question 24

what rpm and ipm should I run this cutting acrylic or for wood? View answer

15°, 30°, 45° and 120° Solid Carbide Spektra Extreme Tool Life Coated Engraving Router Bits for Signmaking

Question 25

What are the rake and clearance angles on the cutting edges? View answer

CNC Solid Carbide Spektra Extreme Tool Life Coated Compression Spiral Router Bits

Question 26

Can I safely increase ramping speed? Current: 10° down over 2cm, 2mm/s stepdown - want faster without damage View answer

CNC Solid Carbide Spektra Extreme Tool Life Coated Compression Spiral Router Bits

Question 27

What are the care/cleaning instructions for this bit, especially with this coating? View answer

CNC Solid Carbide Spektra Extreme Tool Life Coated 2D/3D Carving Tapered and Straight Ball Nose (Conical Ball) Up-Cut Router Bits

Question 28

What is the recommended RPM's to run at View answer

CNC Solid Carbide Spektra Extreme Tool Life Coated Compression Spiral Router Bits

Question 29

What is the effect of sharpening this bit? Does it reduce the effectiveness of the tool? View answer

CNC Solid Carbide Spektra Extreme Tool Life Coated Compression Spiral Router Bits

Question 30

Max milling thickness for laminated chipboard/MDF (melamine) with tool 46170-K — B1 or B length? View answer

CNC Solid Carbide Spektra Extreme Tool Life Coated Compression Spiral Router Bits

Question 31

Can these bits be resharpened ?? View answer

CNC Solid Carbide Spektra Extreme Tool Life Coated Compression Spiral Router Bits

Question 32

What feed and speed should use for laminate particle board. I used this tool n blunt do early View answer

CNC Solid Carbide Spektra Extreme Tool Life Coated Compression Spiral Router Bits

Question 33

Are these bits suitable for wood when the description allows it but the feeds/speeds chart says not recommended? View answer

CNC Solid Carbide Spektra Extreme Tool Life Coated Compression Spiral Router Bits

Spektra™ Extreme Tool Life Coated Router Bits Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic