Answer
Aug 11, 2016 - 12:00 AM
On the 30° and the 60° (Tip width 0.005" - 0.090") you can use 50 IPM @ 18,000 RPM with a chip load per tooth of 0.003" and step down per pass of .010"
Run a few test passes and increase accordingly.
You may also use the following link for more calculation options:
http://www.toolstoday.com/pdf/30-60-D...
Run a few test passes and increase accordingly.
You may also use the following link for more calculation options:
http://www.toolstoday.com/pdf/30-60-D...
